Hydrophobic agent Bayris Delfin acrylic 1 l 100-200 ml/m² (Б00000628)

Hydrophobic agent Bayris Delfin acrylic 1 l 100-200 ml/m² (Б00000628)

Hydrophobic agent Bayris Delfin acrylic 1 l 100-200 ml/m² (Б00000628) - an acrylic-based agent designed for application on concrete, reinforced concrete, asbestos-cement products, bricks, stone, cement-sand plaster, ceramic products, and fences to achieve a final water-repellent coating. Suitable for both interior and exterior projects. This ready-to-use product is odorless and free from toxic substances. It deeply penetrates the substrate, creating a transparent vapor-permeable coating with a "wet stone" effect. After drying, the coating effectively repels water and possesses self-cleaning properties. It protects against UV radiation and atmospheric exposure, reducing the risk of efflorescence, algae, moss, mold, and mildew. Work should be carried out at substrate and ambient temperatures ranging from +8°C to +30°C (in the absence of direct sunlight) and relative air humidity from 50% to 80%. Do not dilute with water. Before use, thoroughly mix the product. Apply with a brush, roller, or spray method, ensuring complete saturation of the substrate. Consumption: 0.1 - 0.2 l/m² per layer depending on the surface type (dependent on the degree of substrate absorption).

Features:

• hydrophobic agent;
• acrylic base;
• for achieving a final water-repellent coating;
• for application on concrete, reinforced concrete, asbestos-cement products, brick, stone, cement-sand plasters, ceramic products, and fences;
• creates a transparent vapor-permeable coating with a "wet stone" effect;
• repels water well and has a self-cleaning property;
• reduces the risk of efflorescence, algae, moss, mold, mildew, and blue stain;
• suitable for both interior and exterior work;
• protects against UV rays and atmospheric influences;
• without a specific odor;
• without the presence of toxic substances;
• volume: 1 l;
• consumption: 100-200 ml/m² per layer;
• recommended 1-2 coats.
• drying time: 2-3 hours per coat;
• work should be conducted at temperatures ranging from +8°C to +30°C.

Why it's worth buying from us?

1. Pre-sale preparation: We conduct thorough checks and provide expert consultations before making a purchase.
2. Presence of retail stores: You have the convenience of visiting our retail stores to see and acquire the equipment in person.
3. Availability of our own service centers: offer both warranty and post-warranty servicing for your equipment and power tools.