Накладений платіж.
Карткою в приват24, LiqPay.
Через касу або термінал самообслуговування Приватбанку.
Наявність авторизованих сервісних центрів
Офіційна гарантія від виробника. 
Повернення/обмін протягом 14 днів з моменту покупки|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Plasma cutter Paton StandardCUT-100-400V 16500 Вт 35 мм (1063010012)
Plasma cutter Paton StandardCUT-100-400V 16500 Вт 35 мм (1063010012) is designed exclusively for manual cutting of metals and alloys up to 35 mm thick using a plasma arc in a compressed air flow. This device from the "Standard" series is a smart compromise between power, functionality, and compact size. Thanks to the increased frequency of the converter, the device has a lower weight and dimensions compared to traditional equipment. The pneumatic system with two valves allows for a smooth ignition of the arc with reduced metal spatter and extends the lifespan of the plasma torch consumables.
Features:
|
Functionality The plasma cutter is designed for manual cutting of metals and alloys up to 35 mm thick. The thickness of a "clean" cut is 25 mm. The working air pressure range is 4.8-7 bar (0.48-0.7 MPa), and the gas flow rate is no less than 180 l/min. The pneumatic system with two valves allows for a smooth ignition of the arc with reduced metal spatter and extends the lifespan of the plasma torch consumables. |
|
Connection to the power supply The plasma cutter is designed for a mains voltage of 380 V. The nominal input current from the power supply is 25 A. |
|
Cutting current Nominal cutting current: 100 A. Cutting current adjustment range: 35-100 A. |
|
Power Nominal power consumption: 13200 W. Maximum power consumption: 16500 W. |
|
Oscillator The device is equipped with a non-contact ignition unit (oscillator). |
|
Dimensions Thanks to the increased frequency of the converter, the device has a lower weight and dimensions compared to traditional equipment. Dimensions: 233х560х440 mm. Weight: 25.8 kg. |
Complete set:
- plasma cutting power supply with a 3 m power cable;
- quick-release connection fitting;
- plasma torch ABIPLAS CUT 110, 6 m;
- welding cable with "ground" clamp ABICOR BINZEL, 4 m;
- instruction;
- warranty card;
- PATON™ branded corrugated cardboard box.
6 reasons to buy plasma cutter Paton StandardCUT-100-400V 16500 Вт 35 мм (1063010012)
- Easy-to-set-up plasma cutter.
- For manual cutting of metals and alloys with a plasma arc in an air stream.
- Maximum cutting metal thickness: 35 mm.
- Maximum power consumption: 16500 W.
- Equipped with a non-contact ignition unit.
- JOHN STALEVAR is an official dealer of TM Paton.
Why it's worth buying from us?
- Pre-sale preparation: We conduct thorough checks and provide expert consultations before making a purchase.
- Presence of retail stores: You have the convenience of visiting our retail stores to see and acquire the equipment in person.
- Availability of our own service centers: offer both warranty and post-warranty servicing for your equipment and power tools.
