Накладений платіж.
Карткою в приват24, LiqPay.
Через касу або термінал самообслуговування Приватбанку.
Наявність авторизованих сервісних центрів
Офіційна гарантія від виробника. 
Повернення/обмін протягом 14 днів з моменту покупки|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Welding semi-automatic inverter Paton MultiPRO-270-15-4-400V 270 А 1.6-6 mm (1044027012)
Welding semi-automatic inverter Paton MultiPRO-270-15-4-400V 270 А 1.6-6 mm (1044027012) is a multifunctional inverter welding machine with digital control, designed for manual arc welding (MMA), argon arc welding (TIG), and semi-automatic welding (MIG/MAG) using protective gases and mixtures. The dual-body design of the MultiPRO-270-15-4-400V allows the power source to be detached from the wire feeding unit, significantly enhancing mobility and convenience when working in MMA and TIG modes. With a nominal current of 270 A, it is sufficient for welding with electrodes ranging from 1.6 mm to 6 mm (fusible) and for semi-automatic welding with solid wires of 0.6 mm to 1.2 mm in diameter. The machine features a contactless ignition block (oscillator) in TIG mode and a powerful four-roller metal wire feeding mechanism with a sealed motor. The universal KZ-2 connector of the "EURO" type allows for the connection of torches from a wide range of manufacturers. A robust bracket for the welding wire enables the installation of reels weighing up to 15 kg. The MultiPRO-270-15-4-400V model combines high power and performance with a lightweight and compact design. Additionally, the LCD screens make it easy and convenient to set up the machine for any task. The unit comes with quality accessories from ABICOR BINZEL, allowing you to start working immediately in four modes (MMA/TIG/MIG/MAG).
Features:
|
Housing This model features a dual-body design with a completely separate wire feed unit, enhancing mobility and convenience when working in MMA and TIG modes. Dimensions: 360х540х400 mm. Weight: 16.5 kg. |
|
Сontrol The MultiPRO-270-15-4-400V features a digital control system, providing multifunctionality and extensive options for precise welding mode adjustments. Thanks to the dual-body design, the power source can easily be separated from the wire feed unit, significantly increasing mobility and convenience when working in MMA and TIG modes. |
|
Mechanism wire feed and a spool bracket The MultiPRO-270-15-4-400V is equipped with a high-quality 4-roller metal wire feed mechanism (wire diameter from 0.6 mm to 1.2 mm) with a powerful sealed motor. The powerful welding wire bracket allows for the installation of spools weighing up to 15 kg. |
|
Universal KZ-2 connector The universal KZ-2 "EURO" type connector allows for the connection of welding torches from a wide range of manufacturers. |
|
Power Nominal power consumption: 8000-9400 W. Maximum power consumption: 11400 W. |
|
Oscillator The device is equipped with a contactless ignition unit (oscillator) for TIG mode. |
|
Current adjustment Welding current adjustment ranges from 12 A to 270 A. |
|
Electrodes Any electrodes with diameters ranging from 1.6 mm to 6 mm can be used. |
|
Welding modes The device is designed for manual arc welding (MMA), argon arc welding (TIG), and semi-automatic welding (MIG/MAG) using protective gases and mixtures. In each welding mode (MMA, TIG, and MIG/MAG), the machine can store up to 16 different configuration settings. |
|
Power connectors The housings of the power connectors are made of heat-resistant material. |
|
Function "ANTI-STICK" During the initial arc strike, the electrode may stick or adhere to the workpiece, which can lead to overheating and excessive heat, potentially damaging the electrode. If the electrode sticks to the workpiece, the device reduces the welding current within 0.6 to 0.8 seconds. This makes it easier for the welder to detach the electrode from the workpiece without the risk of eye injury from an accidental arc strike. Once the electrode is detached from the workpiece, the welding process can continue uninterrupted. |
|
Function "HOT-START" The "HOT-START" function improves ignition even when using electrodes that are difficult to ignite. It also helps to achieve better penetration of the base material during ignition, resulting in fewer cold welds. Additionally, it prevents the formation of slag inclusions. It features manual adjustment. |
|
Function "ARC-FORCE" The "ARC-FORCE" function enhances the stability of welding on a short arc, improves the transfer of metal droplets into the weld pool, improves arc ignition, and reduces the likelihood of electrode sticking. It features manual adjustment. |
Complete set:
- welding semi-automatic inverter;
- semi-automatic welding torch ABIMIG A255 LW, 3 m;
- argon arc torch ABITIG 26, 4 m;;
- copper cable (3 m) with electrode holder ABICOR BINZEL DE2300;
- copper cable (3 m) with "ground" clamp ABICOR BINZEL MK300;
- roller sets for 4 diameters of steel wire and 2 diameters of aluminum wire;
- quick-release gas hose connector;
- shoulder carrying strap;
- instruction;
- warranty card;
- PATON™ branded corrugated cardboard box.
6 reasons to buy welding semi-automatic inverter Paton MultiPRO-270-15-4-400V 270 А 1.6-6 mm (1044027012)
- Powerful welding semi-automatic inverter.
- For manual arc welding (MMA), argon arc welding (TIG), and semi-automatic welding (MIG/MAG) using protective gases and mixtures.
- Suitable for welding with solid wire diameters of 0.6-1.2 mm.
- Compatible with any electrodes ranging from 1.6 mm to 6 mm in diameter.
- Dual-body design.
- JOHN STALEVAR is an official dealer of TM Paton.
Why it's worth buying from us?
- Pre-sale preparation: We conduct thorough checks and provide expert consultations before making a purchase.
- Presence of retail stores: You have the convenience of visiting our retail stores to see and acquire the equipment in person.
- Availability of our own service centers: offer both warranty and post-warranty servicing for your equipment and power tools.
