Накладений платіж.
Карткою в приват24, LiqPay.
Через касу або термінал самообслуговування Приватбанку.
Наявність авторизованих сервісних центрів
Офіційна гарантія від виробника. 
Повернення/обмін протягом 14 днів з моменту покупки|
Quantity
|
Out of stock
|
||
|
|
|||
|
|
|||
Welding semi-automatic inverter Paton EuroMIG 150 А 1.6-4 mm (1021015012)
Welding semi-automatic inverter Paton EuroMIG 150 А 1.6-4 mm (1021015012) is a single-body type device designed for semi-automatic welding ("MIG/MAG"), manual arc welding ("MMA"), and argon ("TIG") welding with direct current in protective gases and gas mixtures. The EuroMIG features a fully digital control system, providing multifunctionality and extensive options for precise welding mode settings. The nominal current of up to 150 A allows it to work with any electrodes ranging from 1.6 mm to 4 mm in diameter and solid welding wire from 0.6 mm to 1 mm in diameter. A separate enclosed compartment for the welding wire improves protection against dust and other contaminants. The EuroMIG is equipped with a 2-roller metal wire feed mechanism, and the universal KZ-2 "EURO" type connector enables the connection of welding torches from a wide range of manufacturers. The EuroMIG, combining high power and performance, is lightweight and compact in size. The device is supplied with high-quality accessories from ABICOR BINZEL, allowing immediate use in MIG/MAG and MMA modes.
Features:
|
Housing It has a sturdy metal housing with dimensions of 390х194х295 mm. Weight: 12.7 kg. |
|
Сontrol The EuroMIG features a fully digital control system, providing multifunctionality and extensive options for precise welding mode adjustments. |
|
Mechanism wire feed The EuroMIG is equipped with a 2-roller metal wire feed mechanism (wire diameter from 0.6 mm to 1 mm). The wire feed speed adjustment range is 1.5-10 m/min. |
|
Universal KZ-2 connector The universal KZ-2 "EURO" type connector allows for the connection of welding torches from a wide range of manufacturers. |
|
Power Nominal power consumption: 3800-4400 W. Maximum power consumption: 5500 W. |
|
Reliability of the product All electronics in the device are coated with two layers of high-quality varnish, ensuring the reliability of the product throughout its entire service life. |
|
Current adjustment Welding current adjustment ranges from 8 A to 150 A. |
|
Electrodes Any electrodes with diameters ranging from 1.6 mm to 4 mm can be used. |
|
Welding modes The device is designed for semi-automatic welding ("MIG/MAG"), manual arc welding ("MMA"), and argon welding ("TIG") with direct current using protective gases and gas mixtures. |
|
Function "ANTI-STICK" During the initial arc strike, the electrode may stick or adhere to the workpiece, which can lead to overheating and excessive heat, potentially damaging the electrode. If the electrode sticks to the workpiece, the device reduces the welding current within 0.6 to 0.8 seconds. This makes it easier for the welder to detach the electrode from the workpiece without the risk of eye injury from an accidental arc strike. Once the electrode is detached from the workpiece, the welding process can continue uninterrupted. |
|
Function "HOT-START" The "HOT-START" function improves ignition even when using electrodes that are difficult to ignite. It also helps to achieve better penetration of the base material during ignition, resulting in fewer cold welds. Additionally, it prevents the formation of slag inclusions. It features manual adjustment. |
|
Function "ARC-FORCE" The "ARC-FORCE" function enhances the stability of welding on a short arc, improves the transfer of metal droplets into the weld pool, improves arc ignition, and reduces the likelihood of electrode sticking. It features manual adjustment. |
Complete set:
- welding semi-automatic inverter;
- welding torch;
- electrode holder;
- abicor Binzel MK300 ground clamp;
- quick-release gas hose connector;
- instruction;
- warranty card;
- PATON™ branded corrugated cardboard box.
6 reasons to buy welding semi-automatic inverter Paton EuroMIG 150 А 1.6-4 mm (1021015012)
- Powerful welding semi-automatic inverter.
- For semi-automatic welding ("MIG/MAG"), manual arc welding ("MMA"), and argon welding ("TIG") with direct current using protective gases and gas mixtures.
- Suitable for welding with solid wire diameters of 0.6-1 mm.
- Compatible with any electrodes ranging from 1.6 mm to 4 mm in diameter.
- Smooth welding current adjustment from 8 A to 150 A.
- JOHN STALEVAR is an official dealer of TM Paton.
Why it's worth buying from us?
- Pre-sale preparation: We conduct thorough checks and provide expert consultations before making a purchase.
- Presence of retail stores: You have the convenience of visiting our retail stores to see and acquire the equipment in person.
- Availability of our own service centers: offer both warranty and post-warranty servicing for your equipment and power tools.
