Sealant Wurth DOS for pipes with teflon 50 g 1 g/сm³ (0893511050)

Sealant Wurth DOS for pipes with teflon 50 g 1 g/сm³ (0893511050)

Sealant Wurth DOS for pipes with teflon 50 g 1 g/сm³ (0893511050) suitable for use in the manufacturing and repair of automobiles, engines, equipment and tools, shipbuilding, and electrical production. It seals metal pipe joints ISO 7.1 (conical / cylindrical threads) up to R3". The smoothly adjustable dosing system allows you to control the application amount according to the industry needs, minimizing consumption and waste. It is not suitable for threaded connections containing copper (brass, bronze, red brass) and those in contact with water at temperatures above 40°C. The threads must be degreased and thoroughly cleaned. For complete sealing and pressure resistance up to thread break pressure, the threads should be cut to standard, fully covered with adhesive, tightened securely (> 5 Nm), and should not be twisted.

Features:

• high-quality sealant;
• for sealing all metal pipe couplings and fittings with conical / cylindrical threads according to DIN 2999;
• weight: 50 g;
• white;
• low strength - easy removal;
• instant sealing under pressure up to 5 bar;
• sealant does not drip from the threads;
• resistant to most gases and liquids, according to DIN 2999;
• resistant to large quantities of alkalis, gases, solvents, oils, and fuels;
• does not contain silicone and solvents;
• practical one-hand application;
• good residue removal;
• initial strength, final strength, and functional strength depend on the material;
• DVGW certificate (reg. no. NG-5146BM0338), tested according to DIN EN 751-1;
• NSF tested for compliance with NSF / ANSI 61;
• density: 1 g/cm³;
• initial strength: 10 to 20 min;
• functional strength: 1 to 3 h;
• shear strength under compression: 2-6 N/mm²;
• installation temperature: +5°C to +40°C;
• flash point: 90°C;
• chemical compound: methacrylic acid ester;
• gap-filling capability: up to 0.5 mm;
• breaking torque: from 4 to 8 Nm;
• breaking torque, conditions: M10 mm;
• loosening torque: from 1 to 3 Nm;
• loosening torque, conditions: M10.

Why it's worth buying from us?

1. Pre-sale preparation: We conduct thorough checks and provide expert consultations before making a purchase.
2. Presence of retail stores: You have the convenience of visiting our retail stores to see and acquire the equipment in person.
3. Availability of our own service centers: offer both warranty and post-warranty servicing for your equipment and power tools.